Ryan-O Dock Rollers

The ULTIMATE Protection for Your Boat and Dock

LIMITED LIFETIME WARRANTY

Our brackets are made of heavy gauge steel and are hot-dipped galvanized to insure longevity. The roller tubes and caps are Polyethylene. Unlike PVC, they will not break under any conditions!

EASY TO INSTALL AND MOVE

Ryan-O Dock Rollers are easy to install and will work on either round or square uprights! Simple, bolt-on installation will not damage the uprights. No drilling required and they can be easily moved.

VARIOUS SIZES AND LENGTHS

Ryan-O Dock Rollers are available with either 3-inch or 6-inch roller tubes, and are available in lengths of 6 or 8 feet. We offer models that are either above deck or below deck.

HOW TO DETERMINE THE RIGHT STYLE AND SIZE OF ROLLER

Consider these 3 factors to select the roller that will provide maximum protection for your boat.

STYLE
There are two types of brackets (they cost the same) FLUSH MOUNT and OFFSET.

• FLUSH MOUNT brackets are needed when the uprights-poles are FLUSH with edge of the slip.
• OFFSET brackets are needed when the uprights-poles are 1″-6″ from the edge of the slip.

LENGTH
Six foot and eight foot models are available. The length needed is determined by the area that needs to be protected. Besides the rubrail, the swim platform and the bow rail need to be taken into consideration. Allowance needs to be made for the load in the boat and weather conditions.

DIAMETER
Three inch and six inch diameter models are available. The three inch models are recommended for boats up to 30 feet in length. The six inch models are recommended for boats over 30 feet in length or smaller boats where the conditions are especially rough.